⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Falls County

Falls County, Texas: well depth, water level & drilling cost

✓ 296 TDLR SDR records · verified 2026-06-27

65 ftmedian well depth
55 ft–85 fttypical depth range
27 ftmedian static water level
20 gpmmedian yield (265 tests)

How deep are wells in Falls County, Texas?

The median drilled well depth in Falls County is 65 ft, based on 296 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 55 ft and 85 ft; 90% are shallower than 261 ft. Wells drilled since 2016 have a median depth of 65 ft.

How much does it cost to drill a well in Falls County?

Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Falls County?

The median static water level is 27 ft below ground surface (middle half of wells: 18 ft–40 ft), from 282 measurements.

How much water do wells in Falls County produce?

The median tested yield is 20 gpm (middle half: 10 gpm–45 gpm), from 265 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Falls County address — $19

Drilled depth distribution

0–50 ft 45 50–100 ft 184 100–150 ft 20 150–200 ft 3 200–300 ft 25 300–400 ft 8 400–600 ft 5 600+ ft 6

Who drills wells in Falls County?

Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).

DrillerWells since 2016
Williams Water Wells LLC69
WILLIAMS WATER WELLS LLC41
BRIEN WATER WELLS20
Brien Water Wells18
CLEARWATER WELL SERVICE INC10
WACO DRILLING CO9
Limestone Water Well Drilling8
Texas Southern Drilling6

Get quotes from local drillers

Looking at a specific property in Falls County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Well records by ZIP code in Falls County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.