Texas Water Well Reports › Hale County
Hale County, Texas: well depth, water level & drilling cost
✓ 2,268 TDLR SDR records · verified 2026-09-22
Pull every recorded well near a Hale County address — $49
How deep are wells in Hale County, Texas?
The median drilled well depth in Hale County is 320 ft, based on 2,266 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 297 ft and 342 ft; 90% are shallower than 367 ft. Wells drilled since 2016 have a median depth of 321 ft.
How much does it cost to drill a well in Hale County?
Applying published per-foot rates to the local median depth of 321 ft: drilling and casing alone typically runs $8,025–$20,865; a complete system including pump, pressure tank, and hookup typically runs $19,260–$32,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Hale County?
The median static water level is 240 ft below ground surface (middle half of wells: 200 ft–261 ft), from 521 measurements.
How much water do wells in Hale County produce?
The median tested yield is 18 gpm (middle half: 15 gpm–150 gpm), from 112 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Hale County?
Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).
| Driller | Wells since 2016 |
|---|---|
| DRILL PRO WATER WELL DRILLING | 220 |
| Rodgers Well Service | 186 |
| Thunder Well Service, LLC | 79 |
| HI PLAINS DRILLING, INC. | 59 |
| Vanguard Well Resources, LLC | 42 |
| PETER KLASSEN | 40 |
| Thunder Well Service | 28 |
| Carter Drilling Co., Inc | 21 |
See every driller with wells on record in Hale County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hale County.
Well records by ZIP code in Hale County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Plainview (79072) — 682 wells, median 309 ft
- Petersburg (79250) — 359 wells, median 390 ft
- Cotton Center (79021) — 355 wells, median 333 ft
- Hale Center (79041) — 338 wells, median 328 ft
- Edmonson (79032) — 335 wells, median 319 ft
- Abernathy (79311) — 231 wells, median 238 ft
- Plainview (79073) — 103 wells, median 310 ft
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.