Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Hudspeth County

Hudspeth County, Texas: well depth, water level & drilling cost

✓ 137 TDLR SDR records · verified 2026-06-27

540 ftmedian well depth
200 ft–905 fttypical depth range
265 ftmedian static water level
8 gpmmedian yield (65 tests)

How deep are wells in Hudspeth County, Texas?

The median drilled well depth in Hudspeth County is 540 ft, based on 137 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 200 ft and 905 ft; 90% are shallower than 1,095 ft. Wells drilled since 2016 have a median depth of 500 ft.

How much does it cost to drill a well in Hudspeth County?

Applying published per-foot rates to the local median depth of 500 ft: drilling and casing alone typically runs $12,500–$32,500; a complete system including pump, pressure tank, and hookup typically runs $30,000–$50,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Hudspeth County?

The median static water level is 265 ft below ground surface (middle half of wells: 71 ft–605 ft), from 91 measurements.

How much water do wells in Hudspeth County produce?

The median tested yield is 8 gpm (middle half: 5 gpm–98 gpm), from 65 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Hudspeth County address — $19

Drilled depth distribution

0–50 ft 0 50–100 ft 14 100–150 ft 13 150–200 ft 7 200–300 ft 9 300–400 ft 10 400–600 ft 21 600+ ft 63

Who drills wells in Hudspeth County?

Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).

DrillerWells since 2016
Abel Water Systems14
ABEL WATER SYSTEMS9
Goertzen Drilling6
Arrowhead Well Service & Construction LLC5
Couch Operating, LLC5
HYDRO RESOURCES-MID CONTINENT INC4
Neufeld Family Drilling4
Geoprojects International, Inc3

Get quotes from local drillers

Looking at a specific property in Hudspeth County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.