⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Lipscomb County

Lipscomb County, Texas: well depth, water level & drilling cost

✓ 608 TDLR SDR records · verified 2026-06-27

360 ftmedian well depth
280 ft–420 fttypical depth range
142 ftmedian static water level
100 gpmmedian yield (515 tests)

How deep are wells in Lipscomb County, Texas?

The median drilled well depth in Lipscomb County is 360 ft, based on 608 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 280 ft and 420 ft; 90% are shallower than 476 ft. Wells drilled since 2016 have a median depth of 380 ft.

How much does it cost to drill a well in Lipscomb County?

Applying published per-foot rates to the local median depth of 380 ft: drilling and casing alone typically runs $9,500–$24,700; a complete system including pump, pressure tank, and hookup typically runs $22,800–$38,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Lipscomb County?

The median static water level is 142 ft below ground surface (middle half of wells: 88 ft–190 ft), from 564 measurements.

How much water do wells in Lipscomb County produce?

The median tested yield is 100 gpm (middle half: 65 gpm–100 gpm), from 515 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Lipscomb County address — $19

Drilled depth distribution

0–50 ft 2 50–100 ft 12 100–150 ft 20 150–200 ft 26 200–300 ft 102 300–400 ft 217 400–600 ft 221 600+ ft 8

Who drills wells in Lipscomb County?

Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).

DrillerWells since 2016
HOWARD DRILLING COMPANY59
Hydro Resources Mid Continent Inc.42
ETTER WATER WELL LLC18
3T Drilling, Inc.18
ETTER WATER WELL,LLC6
Roy's Water Well5
Canadian Water Well Inc.2
Fairview Sales & Service1

Get quotes from local drillers

Looking at a specific property in Lipscomb County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.