⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Mitchell County

Mitchell County, Texas: well depth, water level & drilling cost

✓ 959 TDLR SDR records · verified 2026-06-27

200 ftmedian well depth
145 ft–240 fttypical depth range
70 ftmedian static water level
50 gpmmedian yield (658 tests)

How deep are wells in Mitchell County, Texas?

The median drilled well depth in Mitchell County is 200 ft, based on 959 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 145 ft and 240 ft; 90% are shallower than 285 ft. Wells drilled since 2016 have a median depth of 195 ft.

How much does it cost to drill a well in Mitchell County?

Applying published per-foot rates to the local median depth of 195 ft: drilling and casing alone typically runs $4,875–$12,675; a complete system including pump, pressure tank, and hookup typically runs $11,700–$19,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Mitchell County?

The median static water level is 70 ft below ground surface (middle half of wells: 50 ft–90 ft), from 709 measurements.

How much water do wells in Mitchell County produce?

The median tested yield is 50 gpm (middle half: 20 gpm–99 gpm), from 658 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Mitchell County address — $19

Drilled depth distribution

0–50 ft 13 50–100 ft 51 100–150 ft 183 150–200 ft 224 200–300 ft 407 300–400 ft 56 400–600 ft 17 600+ ft 8

Who drills wells in Mitchell County?

Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).

DrillerWells since 2016
Blackwell Water Well Service Inc140
Artesian Drilling LLC52
Wildcat Services LLC40
kinard water well service30
BLACKWELL WATERWELL SERV INC15
R&R DRILLING LLC10
LEONARD WATER SERVICES9
Nomad Drilling8

Get quotes from local drillers

Looking at a specific property in Mitchell County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Well records by ZIP code in Mitchell County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.