⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Shackelford County

Shackelford County, Texas: well depth, water level & drilling cost

✓ 17 TDLR SDR records · verified 2026-06-27

100 ftmedian well depth
40 ft–108 fttypical depth range
23 ftmedian static water level
5 gpmmedian yield (13 tests)

How deep are wells in Shackelford County, Texas?

The median drilled well depth in Shackelford County is 100 ft, based on 17 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 40 ft and 108 ft; 90% are shallower than 216 ft. Wells drilled since 2016 have a median depth of 40 ft.

How much does it cost to drill a well in Shackelford County?

Applying published per-foot rates to the local median depth of 40 ft: drilling and casing alone typically runs $1,000–$2,600; a complete system including pump, pressure tank, and hookup typically runs $2,400–$4,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Shackelford County?

The median static water level is 23 ft below ground surface (middle half of wells: 9 ft–49 ft), from 13 measurements.

How much water do wells in Shackelford County produce?

The median tested yield is 5 gpm (middle half: 3 gpm–10 gpm), from 13 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Shackelford County address — $19

Drilled depth distribution

0–50 ft 6 50–100 ft 2 100–150 ft 5 150–200 ft 1 200–300 ft 2 300–400 ft 1 400–600 ft 0 600+ ft 0

Who drills wells in Shackelford County?

Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).

DrillerWells since 2016
Moore's Water Well3
LEONARD DRILLING LLC3
E&C DRILLING CO.1
Michael Gilliam Consultant Services1
LEONARD WATER SERVICES1

Get quotes from local drillers

Looking at a specific property in Shackelford County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.