Texas Water Well Reports › Shelby County › Shelbyville (75973)
Shelbyville, TX (75973): well depth, water level & drilling cost
✓ 288 TDLR SDR records · Shelby County
Pull every recorded well near a Shelbyville (75973) address — $49
How deep are wells in Shelbyville (75973), Texas?
The median drilled well depth in Shelbyville (75973) is 310 ft, based on 288 wells with recorded depths in the state TDLR SDR database. Half fall between 220 ft and 390 ft; 90% are shallower than 480 ft.
How much does it cost to drill a well in Shelbyville (75973)?
Applying published per-foot rates to the local median depth of 310 ft: drilling and casing alone typically runs $7,750–$20,150; a complete system including pump, pressure tank, and hookup typically runs $18,600–$31,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Shelbyville (75973)?
The median static water level is 75 ft below ground surface (middle half of wells: 47 ft–100 ft), from 248 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Shelby County.
Part of Shelby County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.