Texas Water Well Reports › Johnson County › Grandview (76050)
Grandview, TX (76050): well depth, water level & drilling cost
✓ 515 TDLR SDR records · Johnson County
Pull every recorded well near a Grandview (76050) address — $49
How deep are wells in Grandview (76050), Texas?
The median drilled well depth in Grandview (76050) is 240 ft, based on 515 wells with recorded depths in the state TDLR SDR database. Half fall between 220 ft and 300 ft; 90% are shallower than 340 ft.
How much does it cost to drill a well in Grandview (76050)?
Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Grandview (76050)?
The median static water level is 130 ft below ground surface (middle half of wells: 100 ft–175 ft), from 421 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Johnson County.
Part of Johnson County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.