Texas Water Well Reports › Tom Green County › San Angelo (76903)
San Angelo, TX (76903): well depth, water level & drilling cost
✓ 174 TDLR SDR records · Tom Green County
Pull every recorded well near a San Angelo (76903) address — $49
How deep are wells in San Angelo (76903), Texas?
The median drilled well depth in San Angelo (76903) is 100 ft, based on 174 wells with recorded depths in the state TDLR SDR database. Half fall between 83 ft and 148 ft; 90% are shallower than 294 ft.
How much does it cost to drill a well in San Angelo (76903)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in San Angelo (76903)?
The median static water level is 55 ft below ground surface (middle half of wells: 41 ft–78 ft), from 142 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Tom Green County.
Part of Tom Green County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.