⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Tom Green County › Mereta (76940)

Mereta, TX (76940): well depth, water level & drilling cost

✓ 153 TDLR SDR records · Tom Green County

120 ftmedian well depth
100 ft–155 fttypical depth range
40 ftmedian static water level
40 gpmmedian yield (126 tests)

Pull every recorded well near a Mereta (76940) address — $49

How deep are wells in and around Mereta (76940), Texas?

The median drilled well depth in and around Mereta (76940) is 120 ft, based on 152 wells with recorded depths in the state TDLR SDR database. Half fall between 100 ft and 155 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Mereta (76940)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mereta (76940)?

The median static water level is 40 ft below ground surface (middle half of wells: 24 ft–60 ft), from 126 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 35 100–150 ft 76 150–200 ft 25 200–300 ft 13 300–400 ft 2 400–600 ft 1 600+ ft 0
Looking at a specific property in Mereta (76940)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mereta (76940)

Free. Goes to licensed drillers working Tom Green County.

Part of Tom Green County well records.

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.