⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Montgomery County › Spring (77386)

Spring, TX (77386): well depth, water level & drilling cost

✓ 262 TDLR SDR records · Montgomery County

270 ftmedian well depth
229 ft–331 fttypical depth range
120 ftmedian static water level
50 gpmmedian yield (249 tests)

Pull every recorded well near a Spring (77386) address — $49

How deep are wells in Spring (77386), Texas?

The median drilled well depth in Spring (77386) is 270 ft, based on 262 wells with recorded depths in the state TDLR SDR database. Half fall between 229 ft and 331 ft; 90% are shallower than 409 ft.

How much does it cost to drill a well in Spring (77386)?

Applying published per-foot rates to the local median depth of 270 ft: drilling and casing alone typically runs $6,750–$17,550; a complete system including pump, pressure tank, and hookup typically runs $16,200–$27,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Spring (77386)?

The median static water level is 120 ft below ground surface (middle half of wells: 70 ft–156 ft), from 260 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 1 100–150 ft 2 150–200 ft 23 200–300 ft 125 300–400 ft 82 400–600 ft 19 600+ ft 10
Looking at a specific property in Spring (77386)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Spring (77386)

Free. Goes to licensed drillers working Montgomery County.

Part of Montgomery County well records.

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.