Texas Water Well Reports › Wilson County › Falls City (78113)
Falls City, TX (78113): well depth, water level & drilling cost
✓ 284 TDLR SDR records · Wilson County
Pull every recorded well near a Falls City (78113) address — $49
How deep are wells in Falls City (78113), Texas?
The median drilled well depth in Falls City (78113) is 399 ft, based on 284 wells with recorded depths in the state TDLR SDR database. Half fall between 300 ft and 500 ft; 90% are shallower than 636 ft.
How much does it cost to drill a well in Falls City (78113)?
Applying published per-foot rates to the local median depth of 399 ft: drilling and casing alone typically runs $9,975–$25,935; a complete system including pump, pressure tank, and hookup typically runs $23,940–$39,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Falls City (78113)?
The median static water level is 82 ft below ground surface (middle half of wells: 58 ft–112 ft), from 272 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wilson County.
Part of Wilson County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.