Texas Water Well Reports › Wilson County › Floresville (78114)
Floresville, TX (78114): well depth, water level & drilling cost
✓ 714 TDLR SDR records · Wilson County
Pull every recorded well near a Floresville (78114) address — $49
How deep are wells in Floresville (78114), Texas?
The median drilled well depth in Floresville (78114) is 361 ft, based on 714 wells with recorded depths in the state TDLR SDR database. Half fall between 319 ft and 420 ft; 90% are shallower than 500 ft.
How much does it cost to drill a well in Floresville (78114)?
Applying published per-foot rates to the local median depth of 360 ft: drilling and casing alone typically runs $9,000–$23,400; a complete system including pump, pressure tank, and hookup typically runs $21,600–$36,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Floresville (78114)?
The median static water level is 108 ft below ground surface (middle half of wells: 76 ft–134 ft), from 688 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wilson County.
Part of Wilson County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.