⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Potter County › Bushland (79012)

Bushland, TX (79012): well depth, water level & drilling cost

✓ 204 TDLR SDR records · Potter County

290 ftmedian well depth
283 ft–307 fttypical depth range
229 ftmedian static water level
12 gpmmedian yield (138 tests)

Pull every recorded well near a Bushland (79012) address — $49

How deep are wells in Bushland (79012), Texas?

The median drilled well depth in Bushland (79012) is 290 ft, based on 203 wells with recorded depths in the state TDLR SDR database. Half fall between 283 ft and 307 ft; 90% are shallower than 351 ft.

How much does it cost to drill a well in Bushland (79012)?

Applying published per-foot rates to the local median depth of 290 ft: drilling and casing alone typically runs $7,250–$18,850; a complete system including pump, pressure tank, and hookup typically runs $17,400–$29,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Bushland (79012)?

The median static water level is 229 ft below ground surface (middle half of wells: 217 ft–247 ft), from 190 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 0 100–150 ft 0 150–200 ft 2 200–300 ft 128 300–400 ft 57 400–600 ft 15 600+ ft 1
Looking at a specific property in Bushland (79012)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bushland (79012)

Free. Goes to licensed drillers working Potter County.

Part of Potter County well records.

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.