Texas Water Well Reports › Ector County › Gardendale (79758)
Gardendale, TX (79758): well depth, water level & drilling cost
✓ 773 TDLR SDR records · Ector County
Pull every recorded well near a Gardendale (79758) address — $49
How deep are wells in Gardendale (79758), Texas?
The median drilled well depth in Gardendale (79758) is 125 ft, based on 773 wells with recorded depths in the state TDLR SDR database. Half fall between 110 ft and 142 ft; 90% are shallower than 170 ft.
How much does it cost to drill a well in Gardendale (79758)?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Gardendale (79758)?
The median static water level is 85 ft below ground surface (middle half of wells: 73 ft–100 ft), from 232 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Ector County.
Part of Ector County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.