Texas Water Well Reports › Waller County
Waller County, Texas: well depth, water level & drilling cost
✓ 3,706 TDLR SDR records · verified 2026-06-27
How deep are wells in Waller County, Texas?
The median drilled well depth in Waller County is 244 ft, based on 3,705 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 201 ft and 300 ft; 90% are shallower than 374 ft. Wells drilled since 2016 have a median depth of 245 ft.
How much does it cost to drill a well in Waller County?
Applying published per-foot rates to the local median depth of 245 ft: drilling and casing alone typically runs $6,125–$15,925; a complete system including pump, pressure tank, and hookup typically runs $14,700–$24,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Waller County?
The median static water level is 90 ft below ground surface (middle half of wells: 65 ft–120 ft), from 3,631 measurements.
How much water do wells in Waller County produce?
The median tested yield is 50 gpm (middle half: 40 gpm–70 gpm), from 3,531 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Waller County address — $19
Drilled depth distribution
Who drills wells in Waller County?
Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).
| Driller | Wells since 2016 |
|---|---|
| Ricky Bonds Water Wells | 408 |
| Kenco Water Well Svc | 136 |
| Main Stream Environmental | 113 |
| AQUA STAR LLC | 86 |
| MARAL DRILLING | 53 |
| Aqua Star | 43 |
| Texas Southern Drilling | 41 |
| J&S WATER WELLS | 39 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Waller County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Hempstead (77445) — 1,158 wells, median 234 ft
- Waller (77484) — 1,099 wells, median 245 ft
- Brookshire (77423) — 715 wells, median 235 ft
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.