Texas Water Well Reports › Waller County › Brookshire (77423)
Brookshire, TX (77423): well depth, water level & drilling cost
✓ 749 TDLR SDR records · Waller County
Pull every recorded well near a Brookshire (77423) address — $49
How deep are wells in Brookshire (77423), Texas?
The median drilled well depth in Brookshire (77423) is 236 ft, based on 749 wells with recorded depths in the state TDLR SDR database. Half fall between 195 ft and 305 ft; 90% are shallower than 360 ft.
How much does it cost to drill a well in Brookshire (77423)?
Applying published per-foot rates to the local median depth of 235 ft: drilling and casing alone typically runs $5,875–$15,275; a complete system including pump, pressure tank, and hookup typically runs $14,100–$23,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Brookshire (77423)?
The median static water level is 90 ft below ground surface (middle half of wells: 60 ft–118 ft), from 725 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Waller County.
Part of Waller County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.